Current Position:Home > NEWS > Engineering Release
Engineering Release

Commonly used cnc processing g codes

Author:    Release time:2020-10-26   Browse:

In daily mechanical processing, cnc processing equipments are often used, so what are the most commonly used cnc processing g codes? SWKD has been engaged in cnc machining for many years, and we would like to share with you the cnc processing g codes:


   The code name and corresponding function are briefly described as follows:   

G00------Quickly locate du position   

G01------Linear interpolation   

G02------clockwise circular interpolation   

G03------Counterclockwise circular interpolation   

G04------Timed pause   

G05------Circular interpolation through the intermediate point   

G07------Z spline curve interpolation   

G08------Feed acceleration   

G09------Feed deceleration   

G20------Subroutine call   

22------Radius dimension programming mode   

G220-----Use on the system operation interface

G23------diameter size programming mode   

G230-----Use on the system operation interface

G24------End of subroutine   

25------Jump processing   

G26------Cycle processing   

G30------Magnification cancellation   

G31------Multiplication definition   

G32------Equal pitch thread cutting, inch system   

G33------Equal pitch thread cutting, metric system   

G53, G500-Set workpiece coordinate system to cancel   

G54------Set workpiece coordinate system one   

G55------Set the workpiece coordinate system 2   

G56------Set the workpiece coordinate system three   

G57------Set the workpiece coordinate system four   

G58------Set the workpiece coordinate system five   

G59------Set the workpiece coordinate system six   

G60------accurate path method   

G64------Continuous path mode   

G70------Inch size inch   

G71------Metric size mm   

G74------Return to reference point (machine zero point)   

G75------Return to the zero point of programmed coordinate   

G76------Return to the starting point of programmed coordinates   

G81------External fixed cycle   

G331-----Thread canned cycle   

G90------absolute size   

G91------ relative size   

G92------Prefabricated coordinates   

G94------Feed rate, feed per minute   

G95------ feed rate, feed per revolution

More + More + More +
  • Industry News
  • Company News
  • Engineering Release
Copyright ?2020 All Rights Reserved Shenzhen SWKD Precision Industry Co.,ltd ??  ?? 
QQ
Skype
Quotation
Scan it


Scan it Add WeChat

Quote Hotline
138 2520 1936

Back to top

亚洲精品在看在线观看高清